How Can I Tell If My Furnace Thermostat Is Bad?

If you’re having trouble with your home’s heating or cooling systems, start with the thermostat. These devices regulate the performance of your HVAC system and, if they malfunction, can give the impression that something is wrong with your heating or cooling system. For such issues, you can contact any company that provides furnace service in Lebanon.

A broken thermostat causes various indications that alert homeowners that it’s time to replace it. Unfortunately, these symptoms might mimic comfort difficulties, leading Inland Empire residents to believe it’s a problem with their heating or cooling system. In reality, your thermostat could be the source of these problems, and replacing it is often less expensive than repairing your HVAC system.

Signs Of A Bad Thermostat

A broken thermostat may still provide some service, but you should consider replacing it right away if it isn’t working correctly. If you’re not sure how to detect if your home thermostat is broken, consider the following symptoms:

  1. The thermostat isn’t working properly: The fact that your building’s HVAC system won’t switch on or respond to the thermostat is the most evident indicator of a broken thermostat. You should be able to turn on or adjust the functioning of your heating or cooling system from the thermostat. If you alter the thermostat and your furnace or air conditioner does not respond, the thermostat could be malfunctioning.
  2. Your tweaks to the thermostat have no effect: When you alter the temperature settings on your thermostat, it should nearly instantly respond. When you change the thermostat, it will usually make a slight clicking sound before turning on the heating or cooling system. If the clicking sound does not occur or the system does not turn on immediately after the changes are made, the thermostat may need to be replaced.
  3. Your air conditioning isn’t working: Problems in the thermostat’s wiring can cause the signals it transmits to your HVAC system to be disrupted.
  4. The heating and cooling system cycles on and off frequently: It’s possible that the calibration isn’t right, resulting in inaccurate temperature readings. When your HVAC system shuts off too early and doesn’t complete a full heating or cooling cycle, this is known as short cycling. As a result, your heating and cooling systems will be inefficient, resulting in an uncomfortable indoor atmosphere.
  5. Your air conditioning system does not turn off: Due to miscalibration, the thermostat may never get the indication that proper indoor temperatures have been reached due to wiring issues.
  6. Inconsistent Temperatures distributed throughout the house: The temperature in all house areas does not match the thermostat reading — some rooms are hotter/colder than others.
  7. Programmed settings on the thermostat are lost: Thermostats that can be programmed are intended to keep their settings long. If your thermostat continues to lose these settings, it may be time to replace it.

We can assist you in getting a better deal for your heating maintenance in Blue Ash. To get the best furnace repair in Springboro, call us at (513) 932 –7200.

How Much Does It Cost To Repair A Furnace Transformer?

The term “furnace transformer” can be unsettling because it sounds like a new Transformers flick, but the truth is that this element serves a fundamental purpose for any furnace. The furnace transformer’s primary job is to provide electricity to the furnace.

This is essential for the operation of the arc furnace. Some furnaces, for example, require 24 volts to work. This is where you’ll find the furnace’s basic controls, such as timers, ignitions, wiring, and temperature controls. Furnace maintenance is essential for everyone who has an HVAC system to avoid major furnace repairs in Lebanon.

Importance Of Furnace Transformer

  • The value of a transformer in any electrical equipment cannot be overstated.
  • The entire network will not function effectively if you do not regulate the proper voltage according to your circuit breaker or other electrical equipment. Otherwise, the repercussions could include a tripped breaker, burned fuses, and power outages.
  • If you try to force the wrong voltage, your furnace may be permanently destroyed, which will be quite expensive.

Cost To Repair A Furnace Transformer

If conventional efficiency units had been employed, the transformer replacement project would have cost around $360,000. DOE paid an additional $57,000 to offset the cost of TP 1-compliant transformers, which are currently more expensive than standard efficiency transformers.

How To Check Whether Your Furnace Transformer Is Working Or Not?

Furnace repair is a difficult task that may necessitate the assistance of a specialist. Some jobs, like replacing a furnace transformer, are quite simple and can be completed with a little planning — and at a cheap cost. However, you must take some precautions:

  • Check supply voltage

To test the electricity flow to your transformer, you should use a voltage test meter. Transformers are often powered by 120 or 240 volts. Determining the voltage coming into the transformer is an important first step in determining if everything is working properly.

There are two systems in transformers: one for supply voltage and the other for secondary voltage. The supply wires are usually black and white, especially with a 120-volt transformer, but they may have different colors depending on your machine. The black wire is most likely live, while the white wire is more likely neutral. Before proceeding, if feasible, check the manufacturer’s instructions to determine which wire is which. To check the strength of the black wire, use the voltmeter’s black lead. To test the white wire, use the voltmeter’s red lead. If the sort of transformer you have is 120 volts, the voltmeter should indicate 120 volts.

If it doesn’t, test the red lead by connecting it to a ground wire. If that works, your transformer’s white wire is broken.

  • Check secondary voltage

To check for secondary voltage, repeat the procedure. There could be a range of colors in the wires. They are frequently red or blue. Before proceeding, double-check the manufacturer’s instructions to determine which wire is which.

Connect the red lead of your voltage tester to the red wire. Connect the black and blue wires with the black lead. The number of volts should be displayed on your voltage meter. If it doesn’t, the transformer will need to be replaced.

So are you looking forward to repairing your furnace transformer but you are not sure about the cost? If yes, then contact Comfort Solutions Heating and Cooling at (513)932-7200 for more details. We provide other services as well such as heat pump replacement, Springboro. You can click here to know further about our maintenance plans.

5 Things You Can Do To Avoid A Furnace Repair Later

Nobody hates to wake up freezing amid the night. It can be queasy, even dangerous—for your family if your furnace breaks down. However, there are things you can take right now to prevent future problems. Take a look at this list to see what you can do to keep your HVAC system in good working order:

  • Clean Air Filter

Unclean air is bad for our health, and it’s especially bad for allergy sufferers; but, dirty air can easily be avoided with one simple step: a clean air filter. When your air filter is unclean, your system has to work harder, which isn’t good for long-term performance or preventing problems. A clogged air filter raises your heating and cooling costs while also shortening the life of your blower motor and coils. If you want to avoid future problems, one of the first things you should do is change your air filter.

  • Regular Check-Ups

Suitable HVAC maintenance, such as tune-ups and air filter replacement, is essential not only for comfort but also for the longevity of your HVAC system. Plus, we can sometimes detect issues early on, allowing us to solve the problem before it becomes a bigger problem. Most households will have tune-ups twice a year, and if we notice anything that needs to be repaired or replaced, we’ll let you know during those visits.

  • Check Vents

If you want your airflow and circulation to work in your favor, don’t cut off more than 20% of your home’s registers unless you’ve been informed otherwise by an expert. If you do, the airflow in your home will be substantially altered, putting a strain on your system’s ability to function effectively.

  • Keep The Surrounded Area Clean

Check to see whether your furnace is impeded by items such as boxes or furniture. Large things can obstruct the return air grilles, which means the furnace will struggle to do its job, whether it’s a toy or anything that’s been mistakenly positioned directly next to the furnace.

  • Call HVAC Professional If Something Seems Wrong

Do you believe you’re having issues with your ignition? Or perhaps hearing weird sounds? Or do you believe the furnace is cycling too quickly? Don’t dismiss issues that could indicate a problem with your system. If you overlook indications that something is broken or not working properly, it could endanger your family’s safety, and it could also turn into a bigger, more expensive problem to address.

As you can see, the measures outlined here ensure that you aren’t putting undue strain on your HVAC system when you don’t need to. Many people are startled to find that routine maintenance can help prevent furnace problems, but this is true.

Comfort Solutions Heating and Cooling take pleasure in being your go-to choice for trustworthy HVAC service, repair, and support, as well as routine maintenance. You can save money by enrolling in our preventative maintenance program, and you won’t have to worry about your monthly, ongoing maintenance. We provide other services like furnace repair, Lebanon and heat pump replacement, Springboro as well.

Contact us at 513-932-7200 to learn more about our preventative maintenance program or to schedule our services.

How Often Should A Flame Sensor Be Cleaned?

Is your furnace turning on but then shutting off soon as it starts working? Does it do this a few times before shutting down for good? If that’s the case, you’re probably dealing with the same issue that many homeowners face every year: a clogged flame sensor.

The majority of furnace service work is sophisticated and requires the assistance of an HVAC professional, but cleaning your flame sensor is a straightforward procedure. It’s also simple to troubleshoot and determine whether it’s the source of your issue before looking for ‘heating services near me for HVAC professionals.

What Is A Flame Sensor?

The flame sensor is a straightforward device found on the burner assembly. It’s essentially a thin, usually bent metallic rod that sits in front of the furnace’s flame stream.

The flame sensor’s role is to certify to the system that the gas outlet is open and that there is a fire present. There would be a dangerous buildup of unburned gas if the unit continued to generate gas when there was nothing to fire it with. The flame sensor has a very narrow time window to detect the flame when your furnace starts up, and the burners are ignited.

If the sensor detects no flame, the unit will shut off automatically. Most devices will tolerate this shutdown three times before entering a “safety lockdown” for an hour before attempting it again. Your pointless attempts to turn on a heater without a working flame sensor can create wear and tear on other components, lowering efficiency.

What Makes Your Flame Sensor Dirty?

A flame sensor can go bad, but it’s more likely that it’s just dirty from carbon buildup than it is broken. The slightest coating of carbon can cause a flame sensor to misread and shut down because it has a very low tolerance for fluctuations in the reading it takes. Many units are in basements, attics, and laundry rooms where there is a lot of dust, so dust particles get attached to the sensor and burn onto it, causing carbon buildup.

How To Clean Your Flame Sensor?

  • Shut off the power

You must turn off the power to your furnace whenever you perform maintenance on it. A toggle switch is often located on or near the device. If not, you can turn off the furnace at the circuit breaker. If your gas valve isn’t electrically controlled, you’ll have to turn off the gas to the device before working on it.

If your gas valve isn’t electrically controlled, you’ll have to turn off the gas to the device before working on it.

  • Remove the sensor and clean it

The sensor is widely obtainable and is usually secured with a single 1/4″ hex head screw. When you remove this screw, the sensor will slip out, allowing you to clean it more simply. Remove the sensor with care and, use light grain sandpaper to gently massage the metal rod. Remember, you’re not sanding down a vehicle body here; you’re simply cleaning the sensor.

  • Replace the sensor

Simply reattach the sensor’s wire, reinstall the sensor on the flame assembly using the 1/4″ screw, reinstall the unit’s door(s), and switch the power back on after cleaning it.

  • Check the performance

This is typical if the unit takes a few additional seconds to start up or the fan runs for a few seconds. Shutting down the unit’s power causes it to reset and run through a series of checks before attempting to shoot again. Before declaring your problem fixed, make sure the device can start up and stay on at least one more time.

So if you are looking for a professional HVAC company that can clean your system’s flame sensor, then give us a call. We at Comfort Solutions Heating and Cooling provide the best maintenance services. We even provide other services like Furnace tune-up in Lebanon and heating installation in Cincinnati, OH.

Why Is Your Furnace Reset Button Not Working?

All heating systems, such as furnaces, have a variety of parts. When an oil system malfunctions, homeowners may repetitively press the oil furnace restart button. Unfortunately, this tends to mean that these homeowners are unaware of how this feature operates. It is critical to understand what the switch does to ensure safety and prevent further issues from escalating by looking for reliable heating repair near me professional.

What is the Function of the Furnace Reset Button?

There is a reset button with every oil furnace. The red color of this unit makes it easy to identify. Furnaces automatically close when they detect a problem with the equipment. It contributes to the safety of residents.

They do this on occasion by mishap if there is nothing wrong. By pushing this button, you can reinstate the heating system. The furnace may restart and resume standard operation. However, you may discover that this does not resolve the issue.

Rather than repetitively pressing the reset button, only try pressing it twice or contact a professional for repair or furnace replacement in Lebanon. With each push, more gasoline enters the chamber containing the burners, and if an excessive amount of oil piles up in this area, your machinery may catch fire or explode.

How to Troubleshoot the Reset Button?

When furnace sensors detect a lack of fire in its combustion chamber, the restart button usually trips. Also, to prevent further damage, your heating system will get turned off immediately. There are several possible causes for the flame to go out. In some cases, you might be able to resolve the problems on your own.

  • There may be an obstruction if the button keeps tripping even though your oil tank is full of fuel. Perhaps one of the fuel system valves was accidentally closed. Remember to double-check that all of these valves are open before planning a service appointment or taking any harsh measures.
  • It’s also possible that your fuel tank is empty. Check the measuring device to see if it shows that the tank is empty. If that’s the case, arrange for a heating oil delivery and make it clear that you’ve run out of juice. When replenishing an empty tank, an electrician will need to prime the device. If no one takes this precaution, the equipment may get damaged.
  • The subsequent process is to press the reset button after you’ve replenished your oil tank. The furnace should be able to restart on its own. It’s not necessary to leak the fuel line- unless the furnace won’t turn on after you’ve added more oil.
  • The most common reason for draining the heating system is low fuel levels. If you let the oil run out entirely, the furnace may require additional assistance to restart. To avoid this issue, fill the tank before the oil level drops dangerously low.

At Comfort Solutions, we are a leading HVAC professional and can help you save money on your furnace repair, maintenance, or replacement. To book our expert services, contact us at (513)-932-7200 today!

How Do You Clean The Igniter On Your Lennox Furnace?

Is your Lennox furnace turning on but then shutting off just as it gets rolling? Does it do this a few times before shutting down for good? If that’s the case, you’re probably dealing with the same issue that many homeowners face every year – a clogged furnace ignitor.

While various furnace services are complex and require the assistance of a furnace service Lebanon professional, washing your furnace ignitor is a simple procedure. Also, it is simple to troubleshoot and determine whether it’s the source of your issue.

What Are Furnace Ignitors, And What Do They Do?

A furnace ignitor is a straightforward device found on the burner assembly. It is essentially a thin, arched metallic rod that sits in front of the furnace’s fire stream. The heating system ignitor’s objective is to inform the system that the gas valve is open.

This communication is crucial as if the ignitor does not signal the system, there would be a damaging accumulation of unreacted gas if the unit continued to emit gas when there’s nothing to ignite it. Also, the flame sensor holds a limited period to identify the ignition when your furnace starts and the furnaces get ignited.

What Induces a Furnace Ignitor to Accumulate Dirt?

It is likely for a furnace ignitor to fail, but more often than not, it is simply dirty due to carbon accumulation. Because a flame ignitor has a pretty low threshold for variability in the reading it takes, even a thin layer of carbon can cause it to be misinterpreted and shut down.

Because many devices are located- in cellars, attics, and laundry areas where there is a lot of dust and debris, it is easy to see how particles in the atmosphere could stick to the detector and burn onto it, exacerbating carbon buildup.

How to Clean the Ignitor on Your Lennox Furnace?

Here are some steps to clean your Lennox furnace ignitor –

  • Turn off the Furnace’s Electricity.

When performing maintenance on your furnace (or any other appliance), you must cut the power to the device. Turning off the thermostat (temperature sensor) does not turn off the furnace’s electricity.

  • Take out the Gas Sensor.

The sensor is relatively easy to access and is typically held in place by a single 1/4″ hex head fastener. When you remove this bolt, the sensor will slide out, allowing you to clean it even more effortlessly.

  • Remove the Ignitor

After removing the furnace ignitor, use very light grit sandpaper to rub the steel rod lightly. Remember, you’re not sanding down a car body here; you’re simply cleaning the detector of any accumulation.

Then, using a clean hand towel, wipe away any dust left over from the sanding. Just reunite the sensor’s wire, reinstall the sensor on the burner assembly using the 1/4″ screw, replace the unit’s door(s), and turn the electricity back on.

Looking for a reliable professional for a furnace tune-up in Lebanon to get your Lennox furnace ignitor cleaned? We at Comfort Solutions can help you save money on all your repairs and tune-ups. To schedule our professional services, give us a call at 513-228-2343.

How Many Times Can You Hit The Reset Button On Your Furnace?

The restart button on a furnace gets used to turn it off before it trips your circuit breaker. It may be required if the furnace becomes overheated or if the electrical grid gets disrupted. Just hit the reset button again to get the heating system working again.

However, if you press the restart button and your furnace turns off once again, pressing the reset button again can cause severe damage to your furnace. If your furnace continues to shut down despite pressing the power button, it’s time to call professionals for heating maintenance in Blue Ash.

What if the Reset Button Continues to Appear?

A furnace’s restart button usually trips when the heating system detects no fires in the combustion chamber. It is due to a disruption in the supply of energy to the furnace. It will shut down automatically to protect the heating unit from destruction.

Hence, the first thing you should make sure of is that you haven’t run out of resources. If you have, arrange for an oil delivery as quickly as possible and notify the energy company that your tank is empty. Also, if your heating system starts and then shuts down, you must first discover the reset button on your furnace to restart it.

The restart button remains situated on the left side of the air compressor inside the blower compartment. In addition, to begin, pinpoint your circuit breaker and turn off the furnace’s electricity supply. Never press the button again and again because it will continue to produce more oil into the furnace, exacerbating any existing problems.

Also, If rebooting your furnace does not solve the problem, you may have a significant problem that necessitates professional repair. However, if you have prior experience repairing a furnace, look for the following issues that you may be able to DIY.

Mentioned hereunder are some reasons why the reset button of your furnace continues to blink –

  • Impeded Airflow

The restart button sometimes gets tripped since the furnace is not getting enough airflow. Hence ensure to clean the air filters and leave enough valves open to allow the furnace to run smoothly. Also, clean the blower wheel.

  • A Clogged Flame Sensor Rod

The fire sensor rod needs cleaning now and then, and the furnace turns off. Make sure you scrub it down regularly.

  • Fuel Shortage

Burner failure can also arise due to a lack of fuel. In this case, you will need to burn more combustible and afterward reboot the burner to solve this issue. However, if you cannot solve these issues yourself, it is time to call the experts for a furnace tune-up in Springboro.

After looking at the points stated above, we can assert that you must hit the reset button of your once. This is because hitting the button repeatedly times can cause unwanted damage to your heating system. If you are lately experiencing any issues with your furnace, we at Comfort Solutions can help you with all your HVAC maintenance, repair, or installation.

To book our professional services, you can call us at (513)-228-2343.

What Does A Red Blinking Light On Your Lennox Furnace Mean?

You observe a red flashing beacon on your Lennox furnace. The red light will keep on blinking and then stop for a moment if you look closely. If the blinking red light appears during normal conditions, it means the outdoor unit has been turned off due to a fault and gets currently locked out of normal operating conditions.

The blinking red light is usually part of a diagnostic feature that alerts the HVAC repair engineer to the problem. This code is customarily between two and nine digits long, and it will keep appearing. Warm weather patterns can occasionally stimulate this warning, and you can try restarting your system before calling furnace repair Cincinnati, OH experts to resolve the issue.

Why Does a Red Light Appear on a Lennox Furnace?

Mentioned hereunder are some reasons a red light appears on your Lennox furnace –

  • Blower restarting after a system reboot

When your furnace’s power comes back, your blower will usually turn on. Although you may see an error message, everything is in order. It is a furnace mechanism check, and it should initiate soon.

  • Combustion Failure, Fuel, or Fault Proving

Typically, a red blinking light indicating a fuel error, ignition malfunction, or fire pointing breakdowns in the combustion assembly area. This could be because your gas sensor is dirty, which can get remedied by cleaning it. It might, however, raise a red flag with the gas valve or Ignitors. It’s best not to tamper with gas because of the threatening nature. Thus, it is advisable to call experts for furnace repair in Cincinnati, OH.

  • Failures of Pressure Switches and Inducers

Inducers and pressure sensors are furnace components that ensure that unwanted gas gets vented. Verify if your furnace or exhaust is clogged first, even though it got maintained by an expert technician.

  • Switches with a high limit and a rollout

The purpose of these switches is to identify heat. The temperature- within the heat exchanger gets detected by the high control valve. It instructs the fan to turn off to avoid heating the heat exchanger.

The roll-out buttons are strewn about the furnace interior to discover heat where it shouldn’t be. Replace your furnace filtration system if you get a high limit switch error message. If that doesn’t work, seek assistance from a specialist.

  • Furnace Shutdown

When a furnace has tried to fire numerous times but failed, it is said to be locked out. By switching the power off to the heating system at the fuse box, you can reset it. Switch it off for a few moments before turning it back on. Sometimes all you have to do is turn it off and on again, just the same as your computer.

You might cause yourself more trouble if you don’t know what you’re doing and play around with your heater too much. Once you’ve figured out what’s causing your furnace to blink light, call professionals for heating service in Blue Ash to get it fixed right away.

We at Comfort Solutions are leading HVAC professionals and can help you save costs on your furnace repair or maintenance. To book our expert assistance, call us at (513)-228-2343.

How Do You Reset A Lennox Furnace?

In 1895, Lennox International came into being when founder Dave Lennox invented, produced and marketed the first-ever riveted-steel furnace. Nowadays, Lennox International manufactures a line of oil, gas and electric furnaces for residential clients.

A Lennox furnace is one of the best furnaces you can buy on the market. Lennox furnace issues may differ from easy and doable fixes every homeowner can do himself to confusing repairs that need a learned HVAC technician. If your heating system overheats or experiences a malfunction, you can just reset your Lennox furnace.

Causes of the Reset Button to Trip

Furnace reset buttons may be triggered by various causes, including –

  • Loss of Fuel

The reset button which is one of the most important buttons on a furnace might trip if all the fuel has depleted.

  • Blocked or closed valves

Checking for any closed valves could help fix the issue. You should clean the air filters and keep the air vents open for proper airflow.

  • Dirty sensor

Sometimes, the flame sensor rod may be covered with soot and silt, causing the Lennox furnace to shut off. Wiping the flame sensor rod regularly will help prevent this from happening.

  • Dirty Air filter

Plugged-up air filters may cause the Lennox furnace to trip. Cleaning or changing your air filter at least quarterly will enable you to decrease the strain on your furnace and for it to keep on functioning properly.

Where is the Furnace Motor Reset Button?

  • Turn off the power to the Lennox furnace at the circuit breaker which is marked.
  • To access the blower motor and blower wheel which has a small yellow or red button on the side, you have to lift the blower compartment cover.
  • Push the reset button down.

Given below are the 3 steps needed to reset your Lennox furnace –

  • Switch off the electrical supply to your Lennox furnace which is present in an electric panel. This will eradicate the risk of any electrical devastations. Turn off the circuit breaker switch tagged “Furnace” or “Heating System”.
  • Look at the control panel on your Lennox furnace which could be placed on the lowermost panel on downflow furnaces or the top panel on other models.
  • Observe your furnace and look for a raised button or the “Limit Control” switch. Push and release the switch to reset your Lennox furnace. You can follow these instructions in a reverse manner if you want to replace the furnace control access panel.

Although resetting a furnace will clear small mechanical issues, it will not resolve underlying problems like faulty internal components. You will have to call a trained HVAC technician if you want your Lennox furnace up and running in perfect condition.

If you don’t know who to call for a heating tune-up near me, call Comfort Solutions. They have top-rated experienced technicians. They always arrive punctually and are widely acclaimed for their heating service near me. You can book their services by calling (513)-932-7200.

What Causes An Air Conditioner Filter To Turn Black?

We all are aware of the fact that the air filter inside an HVAC system needs to be changed every 2 to 3 months or at least cleaned once a month. Since the air filter functions to trap dander, dirt, dust, and other air particles to enter the ac unit and circulate inside the home, it’s likely to see the dust buildup. But when you see your air filter is getting black, then it might be some other issue with the interior components of your HVAC system.

Dust buildup is fine, but your air filter shouldn’t be black. There are three major reasons due to which air filters can turn black and both of them are not good.

Reasons Your Air Filter Is Turning Black

1. Black Soot

The soot caused by candles or gas water heaters is one of the major reasons due to which the air filters can quickly turn black. Even though burning candles is harmless, the deposit of excess soot on the air filter decreases the efficiency of the HVAC system.

Before using the candles just remember to trim one-quarter inch candle wicks before lighting the candle each time, this can prevent candle soot from turning your AC filters black. Also, try to choose soy all-natural candles rather than candles of petroleum jelly or vegetable oil. Black soot is also produced by Gas water, to avoid this prefer blue color flame which implies a clean burn.

2. Mold

Mold is worse than black soot. When your air conditioning system is in operating condition then condensation droplets get deposited on the evaporator coil, especially in a humid state. Further transfer of this moisture to the air filter causes the formation and growth of black mold.

If you observe any presence of mold on the air filter, replace and dispose of the old air filter immediately. Such mold air filters cause more allergy, asthma, fungal sinusitis, pneumonitis, and other bacteria-related health problems. Locate the source of the mold and contact a technician to fix your HVAC system and to ensure that there is no presence of mold within the air handler. Comfort Solution has incredible HVAC service in Cincinnati oh with highly skilled technicians.

3. Severely clogged air filter

Sometimes the air filters can get severely clogged due to long use. Such clogged air filters restrict airflow, decreasing indoor air quality, and can cause damage to your HVAC system. A clogged air filter cannot trap pollutants effectively so impurities like pet dander can infiltrate the air inside your home. Also, since airflow is not smooth the HVAC system has to work more, consuming more and causing unnecessary wear and tear of components.

After Finding A Black Air Filter

  • Remove and dispose of the dirty black air filter immediately.
  • Vacuum around the space surrounding the air filter and check there shouldn’t be any black particles or debris in the air.
  • Connect a fresh and clean air filter
  • Reach out to a professional HVAC expert to examine your HVAC system

Comfort Solutions offer a variety of ac service in Cincinnati oh at affordable rates. Give us a call to schedule your appointment.