How Often Should Air Conditioners Be Serviced?

A poor functioning air conditioner could stand in the way of a comfortable temperature inside your home and office during harsh weather conditions. Regular maintenance of your system unit saves you from compromising your comfort and increases the AC’s life span. The easiest way to find an HVAC service provider is by searching for a reliable Air conditioning service near me.

What should be the Frequency of Ac Servicing?

People in most areas of the cities in Ohio commonly use air conditioners throughout the year. As recommended by the experts, you should schedule the AC service at least once a year. You can also opt for servicing it twice a year at the beginning of hot and cold seasons. A team of experienced staff inspect the unit for any damage and start their maintenance process in your scheduled time.

What is the process of AC servicing?

  1. AC filter cleaning
  2. Coil cleaning
  3. Fan cleaning
  4. Drain cleaning with leakage check
  5. Coolant check
  6. Technical inspection

After the process completes, the experts suggest whether your AC requires a repair or a replacement, based on their inspection. Besides the regular services, you must also schedule AC inspections at fixed intervals to experience the flawless performance of the air conditioner.

What happens when you don’t get your Ac regularly serviced?

Malfunctioned AC can blow out harmful gases and smelly odors that are dangerous for your health and the environment. You may fail to enjoy the optimum cooling temperature if you do not schedule an air conditioning service near me. Following are some of the consequences of improper servicing.

  • System Breakdown

    If you do not schedule regular service for your AC, its condition may keep deteriorating and result in damage to some vital parts and wires. It is often difficult to replace the essential pieces, resulting in a complete breakdown.

  • Clogged Filters

    Due to a lack of significant maintenance, the cleaning process gets hampered and results in clogged filters. Sand and dust particles silt up the AC filters, coils, and fan that affect the ideal functioning of the system. In these conditions, the unit may not be able to reach the desired temperature.

  • Unwanted Noise and Smell

    A malfunctioned air conditioner may pose excessive pressure on the compressor, producing a lot of noise. Clogged filters or water leakage can also blow out unwanted musty smells. For example, refrigerant (gas) leakage generates a hissing sound from the AC and can be harmful to inhale.

  • A Costly Deal

    Air conditioner repair charges are costlier than maintenance charges. In case of complete damage to the unit, you may even have to replace the whole system. Due to improper functioning, the air conditioner will consume more power than usual, and you may have to pay expensive electricity bills.

Hence, it is a clever choice to have your AC systematically serviced and repaired to reap its maximum benefits. It is essential to pay attention to timely maintenance services by opting for the best Air conditioning repair near me. Comfort Solutions Heating and Cooling provide trustable AC service and repair solutions with the help of skilled professionals. You can reach out to our certified technicians at info@comfort-solutions.net or call us at 513-396-7200.

How Do You Decide Whether To Replace Or Repair Your AC?

Regular maintenance of your AC system increases its life span. However, there comes a time you notice your AC is not functioning the way it used to. Undoubtedly, a situation like that demands you to decide between getting it repaired or replaced with a new one.

Replacing your AC when it merely requires a bit of repairing can be heavy on your pocket while avoiding the replacement despite the frequent repairs will not be cost-effective either. So, how do you decide? Keep on reading to find out!

How do you decide whether to replace or repair your AC?

Following are the signs to look for when choosing between repair and replacement for your AC –

  • Issues with Ac System

Ideally, a well-functioning cooling system would not produce strange noises or odors. Also, if you notice that it’s not cooling properly or is leaking water, then a wise decision here is to seek professional service from a certified HVAC service provider.

It is crucial to consider that your AC’s functioning also depends on regular maintenance. With that comes the point that a functioning AC would not require tune-ups more than twice a year. Thus, in cases where the issues persist despite annual maintenance and frequent repairing, it is likely that your AC has worn out, and it would be best to get it replaced without delay.

  • Cost

A noticeable sign that should alert you about the need to replace your AC is the spike in monthly costs. In the long run, frequent repairs are not cost-effective, which is why you should consider replacing your AC with a technologically advanced model.

The repair cost is not the only indicator here, as your monthly bills would be equally suggestive of the need to replace your AC. This is because, when your AC experiences severe wear and tear, it will overwork to serve its function. As a result, overworking would not only lead to excessive heating and malfunction, but it would immediately sky-rocket the electricity bills.

  • Age

As your AC ages, its functioning decreases, and thus you might need to get it repaired more often than before. An AC older than ten to fifteen years is considered ‘old enough,’ making it more prone to damage and dysfunction. However, the age criteria should not be looked at in isolation as good quality and well-maintained ACs in a typical atmosphere may still function with minor difficulties in cooling.

The signs of uneven cooling and frequent repairing in an old AC suggest the need to get it replaced before it breaks down completely. Additionally, you might also face the issue of not finding the specific parts of your old AC in the modern market, which leaves you with the sole option to get the entire system replaced.

When you feel that nothing seems to work out in the long run, it is best to consider replacing your AC with a new one just in time. We recommend Comfort Solutions to save you from the confusion between repairing and replacing your AC. Their excellent services in AC repair in Lebanon, are worth relying upon. If you have made a choice already, then consider contacting them for AC replacement in Lebanon through their website

What Happens If You Set Your Air Conditioning Unit Too Low?

Maintaining an air conditioner involves more than just regular inspections from AC technicians in Cincinnati, Ohio. Several aspects need to be paid attention to daily as well. The primary one being the thermostat. A broken thermostat is a problem that most places are all too familiar with and can occur if the AC is set at very low temperatures. Read on to understand how this takes place.

What Is A Thermostat And How Does It Work?

The thermostat is a component of an air conditioner that works as a “button”. However, contrary to popular understanding, this is not the usual on and off button. The thermostat can carry out two functions at the same time.

The first function involves setting the desired threshold temperature. At present, the Department of Energy pegs 78 degrees Fahrenheit as the most efficient threshold temperature, especially in the summer. Once this is set, the thermostat will determine if the surrounding temperature is at this level as well.

In case the external temperature is at 78 degrees Fahrenheit as well, there is no need for the thermostat to “switch” the AC on. But once it does go above this temperature, as is the case in the summer, the AC thermostat will turn the AC on. Once it is turned on, the air conditioner will look to cool the external temperature to the pre-set 78 degrees. This is primarily how the thermostat functions but it has seen some advancement in most recent models.

Inability To Cool

If this thermostat is constantly configured to very low temperatures in a high-temperature climate, it will start to give out. Thus, warranting an AC tune-up in Cincinnati, Ohio.
The first sign of a broken thermometer is when the air conditioner can no longer cool the surrounding temperature to the desired level. Rather, it may not have any effect on the temperature or worse, heat the room instead of cooling it.

This is a confirmatory sign that the temperature sensors are not calibrated properly and is probably causing a range of internal problems. This miscalibration will lead to certain parts like the compressor switching off before cooling. The compressor works in conjunction with the thermostat. Its main purpose is to move the refrigerant from the evaporator and coils of a condenser as per the requirements of an individual.

Another outcome is related to a possible “freezing up” of the refrigerant which is present in the air conditioner. A common rule of thumb is that most models can function properly only above 68 degrees Fahrenheit. Any lower temperature will result in the system freezing up. In addition to a frosty refrigerant, the piping and coils could also become covered with ice. A frozen air conditioner may subsequently result in higher repair bills and even higher electricity bills. Therefore, one should ensure that the temperature is not set too low. In addition to this, it would not hurt to get the occasional inspection from experienced technicians. Visit Comfort Solutions to receive top quality AC service in Cincinnati, Ohio.

How To Find Out If An Air Conditioner Is Working Properly?

Most people tend to deal with their air conditioning problems either by calling a technician right away or just ignoring it until it is unavoidable. However, both these cases can be detrimental to one’s finances one way or another. Nonetheless, both these problems can be solved by a simple investigation, one that can be carried out by the homeowner. People tend to think that conducting investigations of air conditioners is strictly restricted to AC technicians in Lebanon.

The DIY Test

Although it is not possible to determine in-depth and accurate problems without technical help, this test should only be used to find out if the AC is cooling properly. Therefore, one can follow the steps below to do so:
1.Prepping The Air Conditioner For Assessment:
To prepare the AC for an assessment, the first task at hand is replacing the furnace filter. This will ensure that no dirt is obstructing the flow of air through the AC. Another possible restriction that should be kept in mind is the vent covers. Remove this as well. One may also be required to use tools depending on how tight or loose the vents are attached.

2. Determine The Location Of Ducts:
The next step would be to locate the different ducts involved in the central cooling system. Namely, the supply and return ducts. The supply ducts should be present in various parts of the residence. These are the main ducts through which cold air is released after cooling. The return ducts, on the other hand, will be placed in a well-ventilated area like the outside of the home or under stairwells. Once these ducts have been identified it is time to check the airflow.

3. Check The Flow Of Air Through Ducts:
To check the airflow, configure the thermostat to a temperature that is significantly lower than the actual room temperature. After doing so, one can place a thermometer inside the supply duct. This will measure how cold the air is when coming out of the supply duct. Allow the AC to function for a significant amount of time and then check the temperature recorded by the thermometer. Then turn to a return air duct that is closest to the supply duct and do the same.
Once the temperatures of both the ducts are recorded, it is time to compare and come to a conclusion.

The benchmark difference that should be present between the two temperatures is around 20 degrees, irrespective of the scale used. If the difference between the temperatures is less than 20 degrees then there is a chance that the system could be under stress. If this is the case then it would be advisable to search up “AC repairing services near me” and have experienced technicians look into the problem.
One possible option, in this case, is the air conditioning repair and tune-up services offered by Comfort Solutions. With branches present in Cincinnati and Lebanon, residents can reach out to expert technicians through their website here.

6 Air Conditioner DIY Repair Tips

There can be some hesitation that one may have towards DIY-ing certain tasks with regards to their air conditioners. The foremost reason for this is that many believe that understanding the working of an air conditioner requires technical training. Although this may be true, there is a range of benefits that accompany tackling minor AC problems without any help from professional AC repairs in Ohio. In addition to this, one can save time and money by doing so. ng so is

However, before one can pick apart their AC for any repair, one must determine what repairs can be done without technical training. Here is a list of six AC DIY repair tips:

Changing The Filter:

A dirty filter can be a common reason for an inefficient AC. This is because the dirt from the air can stick to this filter thus reducing the surface area between the cooling coils and the air. Therefore, it is a good practice to replace this filter every 90 days.

Cleaning The Unit:

One will also find dirt in several components of the AC, both in the interiors as well as the exteriors. The outside of the unit can be especially dirty as the dust and small fragments of leaves are usually present there. One should check the fan and the condenser fins also. To avoid injury the AC must be off while cleaning.

Examining The Thermostat:

The thermostat can be a finicky component, to say the least. There is very little an individual can do without technical training. In the case of thermostats that require batteries, replacing them may solve the problems. However, one can only check if the thermostat is in the right settings.

Checking The Breaker:

This is a simple fix that involves ensuring that the breaker has not tripped. There is a chance that several appliances running at the same time can result in the circuit breaker being overloaded and thus, switching off. Once this happens the AC will refuse to come on. Therefore, this should be one of the first things that one has to check.

Melting Ice:

There can be a case of the AC overcooling which then results in the build-up of ice around and inside the system. Although this may seem like a devastating outcome, one can defrost the system by leaving the fan on inside the AC or just shutting off the air conditioner for a while as the external temperature melts the ice away.

Checking The Ducts:

One should ensure that the supply and return ducts are free from debris that obstruct normal airflow into the interior of the system. Although this may not be very common especially in supply ducts, there is a chance that the return ducts present in a more open area are susceptible to large fragments of dirt being stuck in the vents.

Therefore, one will be able to carry out an informal assessment of their AC without calling a professional technician. In case all these items have been checked and the AC is still struggling to cool, one can visit the experts at Comfort Solutions who offer their services involving AC repairs in Cincinnati, Ohio.

How To Ensure Proper Cleaning Of Your Air Conditioner’s Evaporator Coil?

The life expectancy of a good air conditioning unit is about 15 to 20 years. If not taken care of, the life expectancy of a unit will reduce to 10, or maybe 8 years. In such a case, it is necessary to ensure that owners take the required measures to increase their units’ life expectancy. There are many measures and means through which the overall life expectancy of a unit can be maintained.

One of the best measures to ensure your unit’s long life is its proper cleaning. Dust and dirt can cause damage to the small and sensitive components of the central air conditioning unit, and this can cause you some big expenses.

Evaporator Coil And Its Maintenance

The evaporator coil is the most important component of the air conditioning unit, along with the condenser coil. Most owners are aware that the evaporator coils are behind the panel on the furnace’s top. The role of the refrigerant flowing through these coils is to suck the heat from the air; this helps in the cooling of the room.

If there is dust or dirt on the coil, it may act as an obstruction in the working of the coil. It will further degrade the overall efficiency of your unit, and you will have a higher electricity bill. Dirty evaporator coils can also cause an overall shutdown of your system by freezing the whole unit.

So, owners should ensure that the evaporator coils of their systems are clean and free of any obstructions by an annual inspection. You can contact air conditioning technicians, Cincinnati, Oh for its annual inspection.

A professional technician will do the extensive and proper cleaning of the coils, but owners can do some basic cleaning themselves.

  1. Turn off your AC
  2. Remove the metal tape, access panel, and screws to reach the evaporator coils
  3. You can now see the evaporator coil.
  4. Check for any dust, dirt, or mold growth.
  5. Contact air conditioning technicians, Cincinnati, Oh in case of mold growth instead of treating it on your own.
  6. To remove the dirt, spray the coil cleaner on the coil’s surface and leave it be.
  7. Pour water on the drain so that the coils get cleaned.
  8. If water does not flow down smoothly through the drain pan, there may be some blockage in its way. Contact your technician and stop your actions.
  9. If water flows down smoothly, it means there is no blockage in the pipe. Reapply the cleaner if the dirt is still there.
  10. Once the coils are cleaned to your satisfaction, put the screws back, apply the metal tape, and put everything back in its place.

If you have followed all the above steps and do not feel the coils are clean, or there is some other issue with your central air conditioning unit, contact Comfort Solutions. They provide the best air conditioning services near me and ensure that they solve all your present issues satisfactorily. Drop-in an email at info@comfort-solutions.net or give a call at 513-228-2343 to book an appointment with the professional technicians.

How Do You Clean A Lennox System’s Evaporator Coil?

When you contact an ac service in Springboro for your AC tune-up before the summer, make sure you ask them to pay extra attention to the evaporator coils in your AC. These are the hidden parts responsible for maintaining temperature.

What Do Evaporator Coils Do?

The function of an evaporator coil is simple: they take the heat from inside the house and dump it outside. They are present in both heating and cooling systems. With use, these coils can easily get clogged up with dirt and dust from the air. This will reduce the efficiency of your AC and may cause other problems. If your AC is giving out warm air, it is an indication that the evaporator coils need cleaning.

It is recommended that you keep the coils cleaning to ensure high indoor air quality and low bacterial growth. So, how do you clean these coils?

Method To Clean Evaporator Coils?

Follow these eleven steps to clean your evaporator coils:

  1. Turn off the power to the entire unit.
  2. Remove the outer door or covering of the air conditioner to expose the evaporator coils.
  3. Inspect the coil to determine how dirty it is. Most coils have grease and dirt build-up which block the airflow.
  4. As often, you may also find dirt collected below the coils. Use a small brush or piece of paper to remove this debris.
  5. Once you’ve collected the dust, use a brush to remove any excess dirt that is caked onto the coils. Place cardboard below the coil to collect the dust.
  6. When you’re brushing, make sure to use a stiff brush and only brush in the direction of the fins.
  7. Generously spray a cleaner onto the coils and let it sit for 5-10 minutes.
  8. Depending upon the type of cleaner you use, you may need to rinse out the cleaner using water.
  9. Repeat Steps 7 & 8 until you notice the cleaner is no longer removing any dirt. Typically, this may take 2-3 times if you’re regular with your maintenance.
  10. Inspect the coil to make sure that it is finally clean. You should also check whether any of the fins are bent or broken. If so, you can use a straightener to straighten them again.
  11. Remove the cardboard and reassemble all parts.

While these eleven steps make the process sound very simple, it is anything but. This process should never be done with the power on. Typically, we also recommend keeping the air conditioner turned off for a few hours after the cleaning to make sure the water has time to dry out. This will stop the AC from short-circuiting.

If you notice that many of the fins on the evaporator coils are broken, don’t try to solve the issue by yourself. Instead, find a contractor for AC repair in Springboro. We recommend contacting Comfort Solutions. They have over 40 years of experience in providing HVAC services and can easily solve this problem for you. You can find out more information about their services on their website https://www.comfort-solutions.net/about-us/ or by calling (513)932-7200 or (513)396-7200.