You come home from work, and the first thing you do is turn on your heater. But to your dismay, it trips the breaker and goes out. What do you do?
How to Tell if Your Heater Is the Problem
If your heater is tripping the breaker, there are a few things you can do to restore power and get it working again.
First, try resetting the breaker. This switch on your electrical panel will restore power to the circuit. If the problem persists, there may be something wrong with your heater, which will need to be serviced.
Why Might Your Heater Trip the Breaker?
There are a few reasons why your heater might trip the breaker. One is that it’s overloaded. This can happen if you have a space heater running in addition to your regular heater, for example.
Another possibility is that there’s something wrong with the wiring or the thermostat. If this is the case, you’ll need to call a professional to take a look and get your heater up and running safely again.
How to Reset the Breaker
If your heater has tripped the breaker, the first thing you’ll need to do is reset the breaker. Here’s how:
- Locate your home’s breaker box. It will be in a closet, crawlspace, or basement.
- Flip all of the switches in the breaker box to the off position.
- Wait at least five minutes before flipping any switches back on. It will reset the system.
- Flip the switch for your heater to the “on” position. If the breaker trips again, you’ll need to call a professional electrician to assess and fix the problem.
How to Troubleshoot Your Heater
If your heater trips the breaker, it could be because the coils are dirty and need to be cleaned. Another possibility is that the fan isn’t working properly, so the heat can’t circulate.
To troubleshoot your heater, check the coils and clean them if they’re dirty. You’ll need to check the fan if that doesn’t work. Maybe the fan needs a replacement if this troubleshooting doesn’t work.
When to Call a Professional
You may be wondering when you should call a professional. And the answer is: probably sooner than you think.
While it might be tempting to try and fix the problem yourself, it’s always best to leave these sorts of things to the professionals. After all, they have the training and experience to know exactly what to do, and they can usually spot potential problems you might not see.